Saturday, September 13, 2014

Time To Learn How To Drive A Motorcycle

Time To Learn How To Drive A Motorcycle - Learning how to drive a motorcycle is one of the many incredible experiences that you will ever have in life. It is a liberating, romantic and rebellious activity all rolled into one. Not only that... it is full of fun. It can be addictive and fully worth the risks.

However, it is crucial for you to approach riding with the caution it deserves. You should ensure self-preservation and thoughtfulness, thus making the whole process more secure and enjoyable. Here are some general guidelines that you can use regardless of whatever motorcycle you are interested in. Above all, before trusting your life on a motorcycle, ensure that it is safe and roadworthy.

The first thing on how to drive a motorcycle is to put on as much safety gear as possible. This includes the gloves, boots, suitable clothing, and of course, a helmet. Next, you will want to start by standing on the left side of the motorcycle. Now gently lean against the tank or handlebars and with all your weight on your left leg, lift your right leg over the bike to the opposite side of it. Rest yourself on the seat with both feet planted firmly on the ground. Ensure that the mirrors are properly adjusted for you. At this point, you should familiarize yourself with the foot peg positions and the positions of the turn signals, lights, and the horn. Now turn your attention to the main controls such as the brakes, throttle, clutch, and the shift pedal.

It is now time for you to focus on your technique. The right hand is responsible for controlling the front brakes by squeezing the lever while twisting the handgrip toward you will control accelerating. The right foot should operate the rear brake while the front brakes are in use. Ideally, you will want to use both front and rear brakes together. Apply pressure gently and increase accordingly until the desired braking action is achieved. Too much front brake could cause you to go head over heels while too much rear brake could cause you to skid out.

The clutch lever is found ahead of the left hand grip. It will assist you in connecting and disconnecting the transmission from any engine motion. By pressing the clutch, you effectively put the motorcycle into a neutral situation.

Of course, you will want to master the shift patterns of the motorcycle. These usually include up to six gears and a position of neutral which is generally found between first and second gear. Shifting is carried out by disengaging the clutch through use of the left hand. Now shift with the help of the left foot and engaging the clutch. You would step down on the shift peg to put the transmission into first gear. After a short acceleration period, place your toe under the shift peg and from here on, you tap the peg upward to move to the next higher gear. When it is time to slow down and or stop, you need to tap the shift peg down in order to get back to first gear. At a stop light, you will want to pause the shift peg between first and second gear, effectively putting the transmission into neutral. This will allow you to release the clutch lever and to not have to hold it depressed while you are waiting to start moving forward again.

Modern bikes are normally started electrically without having to kick-start the engine. Ensure that the kill switch is in the on position before you turn the key to start the engine. Allow a few seconds for your engine to warm up. Also, retract the kickstand before putting the bike in gear.
Learning how to drive a motorcycle is very enjoyable but should be carried out with some caution. Congratulations for making your first ride a success!

appropriate comments on the above article , do not spam , and do not attach active links